The Ontario Building Code | Applicable Editions
1.3.1.2. Applicable Editions
(1) Where documents are referenced in this Code, they shall be in the editions designated in Column 2 of Table 1.3.1.2.
Table 1.3.1.2.
Documents Referenced in the building Code
Forming Part of Sentence 1.3.1.2.(1)
| Item | Column 1 Issuing Agency | Column 2 Document Number | Column 3 Title of Document(1) | Column 4 Code Reference |
| |
| 1. | ACGIH | 2013, 28th Edition | industrial Ventilation Manual | 6.2.1.1.(1) 6.2.2.4.(1) |
| |
| 2. | AISI | S201-07 | North American Standard for Cold Formed Steel Framing – Product Data | 9.24.1.2.(1) |
| |
| 3. | ANSI | A208.1-2009 | Particleboard | Table 5.10.1.1. 9.23.14.2.(3) 9.29.9.1.(1) 9.30.2.2.(1) |
| |
| 4. | ANSI/ASHRAE | 62.1-2010 | 6.2.2.1.(2) 6.2.3.8.(15) |
| ||
| 5. | ANSI/ASHRAE/IESNA | 90.1-2010 | Energy Standard for Buildings Except Low-Rise Residential Buildings | 6.2.1.1.(1) |
| |
| 6. | ANSI/CSA | ANSI Z21.22-1999 / CSA 4.4-M99 (including Addenda 1 and 2) | Relief Valves for Hot Water Supply Systems | 7.2.10.11.(1) |
| |
| 7. | APHA/AWWA/WEF | 2012, 22nd Edition | Standard Methods for the Examination of Water and Waste Water | 8.9.2.4.(1)(b) |
| |
| 8. | ASHRAE | 2013 | Fundamentals | 5.2.1.3.(1) 6.2.1.1.(1) |
| |
| 9. | ASHRAE | 2011 | HVAC Applications | 6.2.1.1.(1) |
| |
| 10. | ASHRAE | 2012 | HVAC Systems and Equipment | 6.2.1.1.(1) |
| |
| 11. | ASHRAE | 2014 | Refrigeration | 6.2.1.1.(1) |
| |
| 12. | ASME | A112.19.8-2007 | Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs | 3.12.4.1.(9) |
| |
| 13. | ASME | B16.3-2011 | Malleable Iron Threaded Fittings: Classes 150 and 300 | 7.2.6.6.(1) |
| |
| 14. | ASME | B16.4-2011 | Gray Iron Threaded Fittings: Classes 125 and 250 | 7.2.6.5.(1) Table 7.2.11.2. |
| |
| 15. | ASME | B16.12-2009 | Cast Iron Threaded Drainage Fittings | 7.2.6.3.(1) |
| |
| 16. | ASME | B16.15-2011 | Cast Copper Alloy Threaded Fittings: Classes 125 and 250 | 7.2.7.3.(1) |
| |
| 17. | ASME | B16.18-2012 | Cast Copper Alloy Solder Joint Pressure Fittings | 7.2.7.6.(1) 7.2.7.6.(2) Table 7.2.11.2. |
| |
| 18. | ASME | B16.22-2001 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings | 7.2.7.6.(1) Table 7.2.11.2. |
| |
| 19. | ASME | B16.23-2011 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | 7.2.7.5.(1) |
| |
| 20. | ASME | B16.24-2011 | Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500 and 2500 | 7.2.7.2.(1) |
| |
| 21. | ASME | B16.26-2011 | Cast Copper Alloy Fittings for Flared Copper Tubes | 7.2.7.7.(1) 7.2.7.7.(2) Table 7.2.11.2. |
| |
| 22. | ASME | B16.29-2007 | Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV | 7.2.7.5.(1) |
| |
| 23. | ASME | B18.6.1-1981 | Wood Screws (Inch Series) | Table 5.10.1.1. 9.23.3.1.(3) |
| |
| 24. | ASME / CSA | ASME A17.1-2010 / CSA B44-10 | Safety Code for Elevators and Escalators | 3.5.2.2.(1) Table 4.1.5.11. 7.4.3.6.(1) |
| |
| 25. | ASME / CSA | ASME A112.18.1-2012 / CSA B125.1-12 | Plumbing Supply Fittings | 7.2.10.6.(1) 7.6.5.2.(1) |
| |
| 26. | ASME / CSA | ASME A112.18.2-2011 / CSA B125.2-11 | Plumbing Waste Fittings | 7.2.3.3.(1) 7.2.10.6.(2) |
| |
| 27. | ASME / CSA | ASME A112.19.1-2008 / CSA B45.2-08 | Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures | 7.2.2.2.(3) 7.2.2.2.(4) |
| |
| 28. | ASME / CSA | ASME A112.19.2-2008 / CSA B45.1-08 | Ceramic Plumbing Fixtures | 7.2.2.2.(2) |
| |
| 29. | ASME / CSA | ASME A112.19.3-2008 / CSA B45.4-08
| Stainless Steel Plumbing Fixtures | 7.2.2.2.(5) |
| |
| 30. | ASME / CSA | ASME A112.19.7-2012 / CSA B45.10-12 | Hydromassage Bathtub Systems | 7.2.2.2.(7) |
| |
| 31. | ASPE | 2005 | Data Books | 7.6.3.1.(2) 7.7.4.1.(1) |
| |
| 32. | ASSE | ANSI/ASSE 1010-2004 | Water Hammer Arresters | 7.2.10.15.(1) |
| |
| 33. | ASSE | 1051-2009 | Individual and Branch Type Air Admittance Valves for Sanitary Drainage Systems | 7.2.10.16.(1) |
| |
| 34. | ASTM | A53 / A53M-10 | Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless | 7.2.6.7.(4) |
| |
| 35. | ASTM | A123 / A123M-09 | Zinc (Hot Dip Galvanized) Coatings on Iron and Steel Products | Table 5.10.1.1. Table 9.20.16.1. |
| |
| 36. | ASTM | A153 / A153M-09 | Zinc Coating (Hot-Dip) on Iron and Steel Hardware | Table 5.10.1.1. Table 9.20.16.1. |
| |
| 37. | ASTM | A252-10 | Welded and Seamless Steel Pipe Piles | 4.2.3.8.(1) |
| |
| 38. | ASTM | A283 / A283M-03 | Low and Intermediate Tensile Strength Carbon Steel Plates | 4.2.3.8.(1) |
| |
| 39. | ASTM | A518 / A518M-99 | Corrosion-Resistant High-Silicon Iron Castings | 7.2.8.1.(1) |
| |
| 40. | ASTM | A653 / A653M-11 | Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | Table 5.10.1.1. 9.3.3.2.(1) |
| |
| 41. | ASTM | A792 / A792M-10 | Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | 9.3.3.2.(1) |
| |
| 42. | ASTM | A1008 / A1008M-11 | Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | 4.2.3.8.(1) |
| |
| 43. | ASTM | A1011 / A1011M-10 | Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | 4.2.3.8.(1) |
| |
| 44. | ASTM | B32-08 | Solder Metal | 7.2.9.2.(2) |
| |
| 45. | ASTM | B42-10 | Seamless Copper Pipe, Standard Sizes | 7.2.7.1.(1) |
| |
| 46. | ASTM | B43-09 | Seamless Red Brass Pipe, Standard Sizes | 7.2.7.1.(2) |
| |
| 47. | ASTM | B68 / B68M-11 | Seamless Copper Tube, Bright Annealed | 7.2.7.4.(3) |
| |
| 48. | ASTM | B88-09 | Seamless Copper Water Tube | 7.2.7.4.(1) 7.2.7.4.(3) Table 7.2.11.2. |
| |
| 49. | ASTM | B306-09 | Copper Drainage Tube (DWV) | 7.2.7.4.(1) |
| |
| 50. | ASTM | B813-10 | Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube | 7.2.9.2.(3) |
| |
| 51. | ASTM | B828-02 | Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings | 7.3.2.4.(1) |
| |
| 52. | ASTM | C4-04 | Clay Drain Tile and Perforated Clay Drain Tile | Table 5.10.1.1. 9.14.3.1.(1) |
| |
| 53. | ASTM | C27-98 | Classification for Fire Clay and High-Alumina Refractory Brick | 9.21.3.4.(1) |
| |
| 54. | ASTM | C73-10 | Calcium Silicate Brick (Sand-Lime Brick) | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 55. | ASTM | C126-11 | Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 56. | ASTM | C212-10 | Structural Clay Facing Tile | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 57. | ASTM | C260 / C260M-10a | Air-Entraining Admixtures for Concrete | 9.3.1.8.(1) |
| |
| 58. | ASTM | C411-11 | Hot-Surface Performance of High-Temperature Thermal Insulation | 6.2.3.4.(3) 6.2.9.2.(2) |
| |
| 59. | ASTM | C412M-11 | Concrete Drain Tile (Metric) | Table 5.10.1.1. 9.14.3.1.(1) |
| |
| 60. | ASTM | C444M-03 | Perforated Concrete Pipe (Metric) | Table 5.10.1.1. 9.14.3.1.(1) |
| |
|
|
|
|
|
| ||
| 61. | ASTM | C494 / C494M-11 | Chemical Admixtures for Concrete | 9.3.1.8.(1) |
| |
| 62. | ASTM | C553-11 | Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications | Table 5.10.1.1. |
| |
| 63. | ASTM | C612-10 | Mineral Fiber Block and Board Thermal Insulation | Table 5.10.1.1. |
| |
| 64. | ASTM | C700-11 | Vitrified Clay Pipe, Extra Strength, Standard Strength and Perforated | Table 5.10.1.1. 9.14.3.1.(1) |
| |
| 65. | ASTM | C834-10 | Latex Sealants | Table 5.10.1.1. 9.27.4.2.(2) |
| |
| 66. | ASTM | C920-11 | Elastomeric Joint Sealants | Table 5.10.1.1. 9.27.4.2.(2) |
| |
| 67. | ASTM | C954-11 | Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness | 9.24.1.4.(1) |
| |
| 68. | ASTM | C991-08e1 | Flexible Fibrous Glass Insulation for Metal Buildings | Table 5.10.1.1. |
| |
| 69. | ASTM | C1002-07 | Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs | Table 5.10.1.1. 9.24.1.4.(1) 9.29.5.7.(1) |
| |
| 70. | ASTM | C1053-00 | Borosilicate Glass Pipe and Fittings for Drain, Waste and Vent (DWV) Applications | 7.2.8.1.(1) |
| |
| 71. | ASTM | C1177 / C1177M-08 | Glass Mat Gypsum Substrate for Use as Sheathing | Table 5.10.1.1. Table 9.23.16.2.A. |
| |
| 72. | ASTM | C1178 / C1178M-11 | Coated Glass Mat Water-Resistant Gypsum Backing Panel | Table 5.10.1.1. 9.29.5.2.(1) |
| |
| 73. | ASTM | C1184-05 | Structural Silicone Sealants | Table 5.10.1.1. 9.27.4.2.(2) |
| |
| 74. | ASTM | C1311-10 | Solvent Release Sealants | Table 5.10.1.1. 9.27.4.2.(2) |
| |
| 75. | ASTM | C1330-02 | Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants | Table 5.10.1.1. 9.27.4.2.(3) |
| |
| 76. | ASTM | C1396 / C1396M-11 | Gypsum Board | 3.1.5.12.(4) Table 5.10.1.1. Table 9.23.16.2.A. 9.29.5.2.(1) Table 9.29.5.3. |
| |
| 77. | ASTM | D323-08 | Vapor Pressure of Petroleum Products (Reid Method) | 1.4.1.2.(1) of Division A |
| |
| 78. | ASTM | D374-99 | Thickness of Solid Electrical Insulation | 3.15.4.1.(1) |
| |
| 79. | ASTM | D568-77 | Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position | 3.15.4.1.(1) |
| |
| 80. | ASTM | D635-06 | Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | 3.15.4.1.(1) |
| |
| 81. | ASTM | D2178-04 | Asphalt Glass Felt Used in Roofing and Waterproofing | Table 5.10.1.1. |
| |
| 82. | ASTM | D2898-10 | Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing | 3.1.5.5.(5) 3.1.5.25.(1) 3.2.3.7.(5) 3.2.3.7.(7) |
| |
| 83. | ASTM | D3261-10a | Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing | 7.2.5.5.(3) |
| |
| 84. | ASTM | E90-04 | Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements | 5.9.1.1.(1) 9.11.1.1.(1) |
| |
| 85. | ASTM | E96 / E96M-10 | Water Vapor Transmission of Materials | 5.5.1.2.(3) 9.25.4.2.(1) 9.25.5.1.(1) |
| |
| 86. | ASTM | E336-05 | Measurement of Airborne Sound Attenuation Between Rooms in Buildings | 5.9.1.1.(1) 9.11.1.1.(1) |
| |
| 87. | ASTM | E413-04 | Classification for Rating Sound Insulation | 5.9.1.1.(1) 9.11.1.1.(1) |
| |
| 88. | ASTM | E2190-10 | Insulating Glass Unit Performance and Evaluation | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 89. | ASTM | F476-84 | Security of Swinging Door Assemblies | 9.7.5.2.(2) |
| |
| 90. | ASTM | F628-08 | Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core | 7.2.5.10.(1) 7.2.5.12.(1) 7.2.5.12.(2) |
| |
| 91. | ASTM | F714-10 | Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter | 7.2.5.6.(1) |
| |
| 92. | ASTM | F1667-05 | Driven Fasteners: Nails, Spikes and Staples | 9.23.3.1.(1) 9.26.2.2.(1) 9.29.5.6.(1) |
| |
| 93. | AWPA | M4-11 | Care of Preservative-Treated Wood Products | Table 5.10.1.1. |
| |
| 94. | AWS | ANSI/AWS A5.8M/ 5.8:2011 | Specification for Filler Metals for Brazing and Braze Welding | 7.2.9.2.(4) |
| |
| 95. | AWWA | ANSI/AWWA C104 / A21.4-2008 | Cement-Mortar Lining for Ductile-Iron Pipe and Fittings | 7.2.6.4.(2) Table 7.2.11.2. |
| |
| 96. | AWWA | ANSI/AWWA C110 / A21.10-2012 | Ductile-Iron and Gray-Iron Fittings | 7.2.6.4.(3) Table 7.2.11.2. |
| |
| 97. | AWWA | ANSI/AWWA C111 / A21.11-2012 | Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings | 7.2.6.4.(4) Table 7.2.11.2. |
| |
| 98. | AWWA | ANSI/AWWA C151 / A21.51-2009 | Ductile-Iron Pipe, Centrifugally Cast | 7.2.6.4.(1) Table 7.2.11.2. |
| |
| 99. | BCMOH | Version 2, 21st Sept, 2007 | Sewerage System Standard Practice Manual | 8.7.8.3.(2) 8.7.8.3.(3) |
| |
| 100. | BNQ | BNQ 3624-115-2007 | Polyethylene (PE) Pipe and Fittings - Flexible Pipes for Drainage - Characteristics and Test Methods | Table 5.10.1.1. 9.14.3.1.(1) |
| |
| 101. | BNQ | CAN/BNQ 3680-600-2009 | Onsite Residential Wastewater Treatment Technologies | 8.6.2.2.(5) Table 8.6.2.2. |
| |
| 102. | CCBFC | NRCC 38730 1997 | Model National Energy Code of Canada for Buildings | 6.2.1.1.(1) |
| |
| 103. | CCBFC | NRCC 54435 2011 | National Energy Code of Canada for Buildings | 6.2.1.1.(1) |
| |
| 104. | CCBFC | NRCC 38726 1995 | National Building Code of Canada | 1.3.1.2.(3) of Division A |
| |
| 105. | CCBFC | NRCC 53301 2010 | National Building Code of Canada | 2.4.2.1.(2) of Division C |
| |
| 106. | CCBFC | NRCC 53302 2010 | National Plumbing Code of Canada | 2.4.2.1.(2) of Division C |
| |
| 107. | CCBFC | NRCC 53303 2010 | National Fire Code of Canada | 3.3.1.2.(1) 3.3.5.2.(1) 6.2.2.5.(1) |
| |
| 108. | CCBFC | NRCC 38732 1995 | National Farm Building Code of Canada | 1.3.1.2.(1) to (5) of Division A |
| |
| 109. | CGSB | CAN/CGSB-1.501-M89 | Method of Permeance of Coated Wallboard | 5.5.1.2.(2) 9.25.4.2.(5) |
| |
| 110. | CGSB | CAN/CGSB-7.2-94 | Adjustable Steel Columns | 9.17.3.4.(1) |
| |
| 111. | CGSB | CAN/CGSB-10.3-92 | Air Setting Refractory Mortar | 9.21.3.4.(2) 9.21.3.9.(1) 9.22.2.2.(2) |
| |
| 112. | CGSB | CAN/CGSB-11.3-M87 | Hardboard | Table 5.10.1.1. 9.27.9.1.(2) 9.29.7.1.(1) 9.30.2.2.(1) |
| |
| 113. | CGSB | CAN/CGSB-11.5-M87 | Hardboard, Precoated, Factory Finished, for Exterior Cladding | Table 5.10.1.1. 9.27.9.1.(1) |
| |
| 114. | CGSB | CAN/CGSB-12.1-M90 | Tempered or Laminated Safety Glass | 3.3.1.19.(2) 3.4.6.15.(1) 3.4.6.15.(3) Table 5.10.1.1. 9.6.1.2.(2) 9.6.1.4.(1) 9.8.8.7.(1) |
| |
| 115. | CGSB | CAN/CGSB-12.2-M91 | Flat, Clear Sheet Glass | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 116. | CGSB | CAN/CGSB-12.3-M91 | Flat, Clear Float Glass | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 117. | CGSB | CAN/CGSB-12.4-M91 | Heat Absorbing Glass | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 118. | CGSB | CAN/CGSB-12.5-M86 | Mirrors, Silvered | Table 5.10.1.1. 9.6.1.2.(3) |
| |
| 119. | CGSB | CAN/CGSB-12.8-97 | Insulating Glass Units | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 120. | CGSB | CAN/CGSB-12.10-M76 | Glass, Light and Heat Reflecting | Table 5.10.1.1. 9.6.1.2.(1) |
| |
| 121. | CGSB | CAN/CGSB-12.11-M90 | Wired Safety Glass | 3.3.1.19.(2) 3.4.6.15.(1) 3.4.6.15.(3) Table 5.10.1.1. 9.6.1.2.(2) 9.6.1.4.(1) 9.8.8.7.(1) |
| |
| 122. | CGSB | CAN/CGSB-12.20-M89 | Structural Design of Glass for Buildings | 4.3.6.1.(1) 9.6.1.3.(1) |
| |
| 123. | CGSB | CAN/CGSB-19.22-M89 | Mildew Resistant Sealing Compound for Tubs and Tile | 9.29.10.5.(1) |
| |
| 124. | CGSB | CAN/CGSB-34.9-M94 | Asbestos-Cement Sewer Pipe | 7.2.5.1.(2) |
| |
| 125. | CGSB | CAN/CGSB-34.22-94 | Asbestos-Cement Drain Pipe | Table 5.10.1.1. 7.2.5.1.(1) 9.14.3.1.(1) |
| |
| 126. | CGSB | CAN/CGSB-34.23-94 | Asbestos-Cement House Connection Sewer Pipe | 7.2.5.1.(2) |
| |
| 127. | CGSB | CAN/CGSB-37.1-M89 | Chemical Emulsified Type, Emulsified Asphalt for Dampproofing | Table 5.10.1.1. 9.13.2.2.(1) |
| |
| 128. | CGSB | CAN/CGSB-37.2-M88 | Emulsified Asphalt, Mineral Colloid Type, Unfilled, for Dampproofing and Waterproofing and for Roof Coatings | Table 5.10.1.1. 9.13.2.2.(1) 9.13.3.2.(1) |
| |
| 129. | CGSB | CAN/CGSB-37.3-M89 | Application of Emulsified Asphalts for Dampproofing or Waterproofing | 5.8.2.3.(1) Table 5.10.1.1. 9.13.2.3.(1) 9.13.3.3.(1) |
| |
| 130. | CGSB | CAN/CGSB-37.4-M89 | Fibrated, Cutback Asphalt, Lap Cement for Asphalt Roofing | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 131. | CGSB | CAN/CGSB-37.5-M89 | Cutback Asphalt Plastic Cement | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 132. | CGSB | 37-GP-6Ma-1983 | Asphalt, Cutback, Unfilled, for Dampproofing | 5.8.2.2.(6) 5.8.2.2.(7) Table 5.10.1.1. 9.13.2.2.(1) |
| |
| 133. | CGSB | CAN/CGSB-37.8-M88 | Asphalt, Cutback, Filled, for Roof Coating | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 134. | CGSB | 37-GP-9Ma-1983 | Primer, Asphalt, Unfilled, for Asphalt Roofing, Dampproofing and Waterproofing | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 135. | CGSB | 37-GP-12Ma-1984 | Application of Unfilled Cutback Asphalt for Dampproofing | 5.8.2.3.(2) Table 5.10.1.1. 9.13.2.3.(1) |
| |
| 136. | CGSB | CAN/CGSB-37.16-M89 | Filled, Cutback Asphalt for Dampproofing and Waterproofing | Table 5.10.1.1. 9.13.2.2.(1) 9.13.3.2.(1) |
| |
| 137. | CGSB | 37-GP-18Ma-1985 | Tar, Cutback, Unfilled, for Dampproofing | 5.8.2.2.(6) 5.8.2.2.(7) Table 5.10.1.1. 9.13.2.2.(1) |
| |
| 138. | CGSB | 37-GP-21M-1985 | Tar, Cutback, Fibrated, For Roof Coating | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 139. | CGSB | CAN/CGSB-37.22-M89 | Application of Unfilled, Cutback Tar Foundation Coating for Dampproofing | 5.8.2.3.(2) Table 5.10.1.1. 9.13.2.3.(1) |
| |
| 140. | CGSB | 37-GP-36M-1976 | Application of Filled Cutback Asphalt for Dampproofing and Waterproofing | 5.8.2.3.(1) Table 5.10.1.1. |
| |
| 141. | CGSB | 37-GP-37M-1977 | Application of Hot Asphalt for Dampproofing or Waterproofing | 5.8.2.3.(1) Table 5.10.1.1. |
| |
| 142. | CGSB | CAN/CGSB-37.50-M89 | Hot Applied, Rubberized Asphalt for Roofing and Waterproofing | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 143. | CGSB | CAN/CGSB-37.51-M90 | Application for Hot Applied Rubberized Asphalt for Roofing and Waterproofing | 5.6.1.2.(1) 5.8.2.3.(1) Table 5.10.1.1. 9.26.15.1.(1) |
| |
| 144. | CGSB | 37-GP-52M-1984 | Roofing and Waterproofing Membrane, Sheet Applied, Elastomeric | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 145. | CGSB | CAN/CGSB-37.54-95 | Polyvinyl Chloride Roofing and Waterproofing Membrane | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 146. | CGSB | 37-GP-55M-1979 | Application of Sheet Applied Flexible Polyvinyl Chloride Roofing Membrane | 5.6.1.2.(1) Table 5.10.1.1. 9.26.16.1.(1) |
| |
| 147. | CGSB | 37-GP-56M-1985 | Membrane, Modified, Bituminous, Prefabricated, and Reinforced for Roofing | Table 5.10.1.1. 9.13.2.2.(1) 9.13.3.2.(1) 9.26.2.1.(1) |
| |
| 148. | CGSB | 37-GP-64M-1977 | Mat Reinforcing, Fibrous Glass, for Membrane Waterproofing Systems and Built-up Roofing | Table 5.10.1.1. |
| |
| 149. | CGSB | 41-GP-6M-1983 | Sheets, Thermosetting Polyester Plastics, Glass Fiber Reinforced | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 150. | CGSB | CAN/CGSB-41.24-95 | Rigid Vinyl Siding, Soffits and Fascia | Table 5.10.1.1. 9.27.12.1.(1) |
| |
| 151. | CGSB | CAN/CGSB-51.25-M87 | Thermal Insulation, Phenolic, Faced | Table 9.23.16.2.A. 9.25.2.2.(1) |
| |
| 152. | CGSB | 51-GP-27M-1979 | Thermal Insulation, Polystyrene, Loose Fill | 9.25.2.2.(1) |
| |
| 153. | CGSB | CAN/CGSB-51.32-M77 | Sheathing, Membrane, Breather Type | Table 5.10.1.1. 9.20.13.9.(1) 9.26.2.1.(1) 9.27.3.2.(1) |
| |
| 154. | CGSB | CAN/CGSB-51.33-M89 | Vapour Barrier, Sheet, Excluding Polyethylene, for Use in Building Construction | Table 5.10.1.1. 9.25.4.2.(4) |
| |
| 155. | CGSB | CAN/CGSB-51.34-M86 (amended 1988) | Vapour Barrier, Polyethylene Sheet for Use in Building Construction | Table 5.10.1.1. 9.13.2.2.(1) 9.13.4.2.(1) 9.18.6.2.(1) 9.25.3.2.(2) 9.25.3.6.(1) 9.25.4.2.(3) |
| |
| 156. | CGSB | CAN/CGSB-82.6-M86 | Doors, Mirrored Glass, Sliding or Folding, Wardrobe | 9.6.1.2.(2) |
| |
| 157. | CGSB | CAN/CGSB-93.1-M85 | Sheet, Aluminum Alloy, Prefinished Residential | Table 5.10.1.1. 9.27.11.1.(4) |
| |
| 158. | CGSB | CAN/CGSB-93.2-M91 | Prefinished Aluminum Siding, Soffits and Facsia for Residential Use | 3.2.3.6.(4) Table 5.10.1.1. 9.10.14.5.(8) 9.10.14.5.(11) 9.10.15.5.(7) 9.10.15.5.(10) 9.27.11.1.(3) |
| |
| 159. | CGSB | CAN/CGSB-93.3-M91 | Prefinished Galvanized and Aluminum-Zinc Alloy Steel Sheet for Residential Use | Table 5.10.1.1. 9.27.11.1.(2) |
| |
| 160. | CGSB | CAN/CGSB-93.4-92 | Galvanized Steel and Aluminum-Zinc Alloy Coated Steel Siding, Soffits and Fascia, Prefinished, Residential | Table 5.10.1.1. 9.27.11.1.(1) |
| |
| 161. | CSA | CAN/CSA-6.19-01 | Residential Carbon Monoxide Alarming Devices | 6.2.12.3.(1) 9.33.4.3.(1) |
| |
| 162. | CSA | A23.1-09 | Concrete Materials and Methods of Concrete Construction | 4.2.3.6.(1) 4.2.3.9.(1) Table 5.10.1.1. 9.3.1.1.(1) 9.3.1.1.(4) 9.3.1.3.(1) 9.3.1.4.(1) 9.39.1.4.(1) |
| |
| 163. | CSA | CAN/CSA-A23.3-04 | Design of Concrete Structures | Table 4.1.8.9. 4.3.3.1.(1) |
| |
| 164. | CSA | A60.1-M1976 | Vitrified Clay Pipe | 7.2.5.4.(1) |
| |
| 165. | CSA | A60.3-M1976 | Vitrified Clay Pipe Joints | 7.2.5.4.(2) |
| |
| 166. | CSA | CAN/CSA-A82.1-M87 | Burned Clay Brick (Solid Masonry Units Made From Clay or Shale) | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 167. | CSA | A82.4-M1978 | Structural Clay Load-Bearing Wall Tile | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 168. | CSA | A82.5-M1978 | Structural Clay Non-Load-Bearing Tile | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 169. | CSA | CAN3-A82.8-M78 | Hollow Clay Brick | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 170. | CSA | CAN/CSA-A82.27-M91 | Gypsum Board | 3.1.5.12.(4) Table 5.10.1.1. Table 9.23.16.2.A. 9.29.5.2.(1) |
| |
| 171. | CSA | A82.30-M1980 | Interior Furring, Lathing and Gypsum Plastering | Table 5.10.1.1. 9.29.4.1.(1) |
| |
| 172. | CSA | A82.31-M1980 | Gypsum Board Application | 3.2.3.6.(4) Table 5.10.1.1. 9.10.12.4.(3) 9.29.5.1.(2) |
| |
| 173. | CSA | CAN3-A93-M82 | Natural Airflow Ventilators for Buildings | Table 5.10.1.1. 9.19.1.2.(5) |
| |
| 174. | CSA | A123.1-05 /A123.5-05 | Asphalt Shingles Made from Organic Felt and Surfaced with Mineral Granules / Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 175. | CSA | CAN/CSA-A123.2-03 | Asphalt Coated Roofing Sheets | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 176. | CSA | A123.3-05 | Asphalt Saturated Organic Roofing Felt | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 177. | CSA | CAN/CSA-A123.4-04 | Asphalt for Constructing Built-Up Roof Coverings and Waterproofing Systems | Table 5.10.1.1. 9.13.2.2.(1) 9.13.3.2.(1) 9.26.2.1.(1) |
| |
| 178. | CSA | A123.17-05 | Asphalt Glass Felt Used in Roofing and Waterproofing | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 179. | CSA | CAN3-A123.51-M85 | Asphalt Shingle Application on Roof Slopes 1:3 and Steeper | 5.6.1.2.(1) Table 5.10.1.1. 9.26.1.2.(1) |
| |
| 180. | CSA | CAN3-A123.52-M85 | Asphalt Shingle Application on Roof Slopes 1:6 to Less than 1:3 | 5.6.1.2.(1) Table 5.10.1.1. 9.26.1.2.(1) |
| |
| 181. | CSA | CAN/CSA-A165.1-04 | Concrete Block Masonry Units | Table 5.10.1.1. 9.15.2.2.(1) 9.17.5.1.(1) 9.20.2.1.(1) 9.20.2.6.(1) |
| |
| 182. | CSA | CAN/CSA-A165.2-04 | Concrete Brick Masonry Units | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 183. | CSA | CAN/CSA-A165.3-04 | Prefaced Concrete Masonry Units | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 184. | CSA | CAN3-A165.4-M85 | Autoclaved Cellular Units | Table 5.10.1.1. 9.20.2.1.(1) |
| |
| 185. | CSA | CAN/CSA-A179-04 | Mortar and Grout for Unit Masonry | Table 5.10.1.1. 9.15.2.2.(3) 9.20.3.1.(1) |
| |
| 186. | CSA | CAN/CSA-A220.0-06 | Performance of Concrete Roof Tiles | Table 5.10.1.1. 9.26.2.1.(1) |
| |
| 187. | CSA | CAN/CSA-A220.1-06 | Installation of Concrete Roof Tiles | Table 5.10.1.1. 9.26.17.1.(1) |
| |
| 188. | CSA | CAN/CSA-A257 Series-09 | Standards for Concrete Pipe and Manhole Sections | 7.2.5.3.(1) |
| |
| 189. | CSA | CAN/CSA-A257.4-09 | Precast Reinforced Circular Concrete Manhole Sections, Catch Basins, and Fittings | 7.2.5.3.(5) |
| |
| 190. | CSA | A277-08 | Procedure for Factory Certification of Buildings | 9.1.1.9.(1) 3.1.1.1.(2) of Division C 3.2.4.1.(3) of Division C |
| |
| 191. | CSA | CAN/CSA-A324-M88 | Clay Flue Liners | 9.21.3.3.(1) |
| |
| 192. | CSA | CAN/CSA-A371-04 | Masonry Construction for Buildings | 5.6.1.2.(2) Table 5.10.1.1. 9.15.2.2.(3) 9.20.3.2.(7) 9.20.15.2.(1) |
| |
| 193. | CSA | CAN/CSA-A405-M87 | Design and Construction of Masonry Chimneys and Fireplaces | 9.21.3.5.(1) 9.22.1.4.(7) 9.22.5.2.(2) |
| |
| 194. | CSA | AAMA/WDMA/CSA 101/I.S.2/A440-11 | NAFS – North American Fenestration Standard/Specification for Windows, Doors, and Skylights | 5.10.2.2.(1) Table 9.7.3.3. 9.7.4.1.(1) 9.7.4.2.(1) 9.7.4.3.(2) 9.7.5.1.(1) 9.7.5.3.(1) |
| |
| 195. | CSA | A440.2-09 / A440.3-09 | Fenestration Energy Performance / User Guide to CSA A440.2-09, Fenestration Energy Performance | Table 9.7.3.3. 12.3.1.2.(1) |
| |
| 196. | CSA | CAN/CSA-A440.4-07 | Window, Door and Skylight Installation | 9.7.6.1.(1) |
| |
| 197. | CSA | A440S1-09 | Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440, NAFS – North American Fenestration Standard/Specification for Windows, Doors, and Skylights | 5.10.2.2.(1) 9.7.4.2.(1) 9.7.4.3.(1) |
| |
| 198. | CSA | A660-10 | Certification of Manufacturers of Steel Building Systems | 4.3.4.3.(1) |
| |
| 199. | CSA | CAN/CSA-A3001-08 | Cementitious Materials for Use in Concrete | Table 5.10.1.1. 9.3.1.2.(1) 9.28.2.1.(1) |
| |
| 200. | CSA | CAN/CSA-B45.0-02 | General Requirements for Plumbing Fixtures | 7.6.4.2.(1) |
| |
| 201. | CSA | CAN/CSA-B45.9-02 | Macerating Systems and Related Components | 7.2.2.2.(8) |
| |
| 202. | CSA | B52-05 | Mechanical Refrigeration Code | 6.2.2.4.(4) |
| |
| 203. | CSA | B64.0-11 | Definitions, General Requirements, and Test Methods for Vacuum Breakers and Backflow Preventers | 7.2.10.10.(1) |
| |
| 204. | CSA | B64.1.1-11 | Atmospheric Vacuum Breakers (AVB) | 7.2.10.10.(1) |
| |
| 205. | CSA | B64.1.2-11 | Pressure Vacuum Breakers (PVB) | 7.2.10.10.(1) |
| |
| 206. | CSA | B64.1.3-11 | Spill-resistant Pressure Vacuum Breakers (SRPVB) | 7.2.10.10.(1) |
| |
| 207. | CSA | B64.1.4-11 | Vacuum Breaker, Air Space Type (ASVB) | 7.2.10.10.(1) |
| |
| 208. | CSA | B64.2-11 | Hose Connection Vacuum Breakers (HCVB) | 7.2.10.10.(1) |
| |
| 209. | CSA | B64.2.1-11 | Hose Connection Vacuum Breakers (HCVB) with Manual Draining Feature | 7.2.10.10.(1) |
| |
| 210. | CSA | B64.2.1.1-11 | Hose Connection Dual Check Vacuum Breakers (HCDVB) | 7.2.10.10.(1) |
| |
| 211. | CSA | B64.2.2-11 | Hose Connection Vacuum Breakers (HCVB) with Automatic Draining Feature | 7.2.10.10.(1) |
| |
| 212. | CSA | B64.3-11 | Dual Check Valve Backflow Preventers with Atmospheric Port (DCAP) | 7.2.10.10.(1) 7.6.2.5.(4) |
| |
| 213. | CSA | B64.3.1-11 | Dual Check Valve Backflow Preventers with Atmospheric Port for Carbonators (DCAPC) | 7.2.10.10.(1) |
| |
| 214. | CSA | B64.4-11 | Reduced Pressure Principle (RP) Backflow Preventers | 7.2.10.10.(1) |
| |
| 215. | CSA | B64.4.1-11 | Reduced Pressure Principle Backflow Preventers for Fire Protection Systems (RPF) | 7.6.2.4.(2) Table 7.6.2.4. 7.6.2.4.(4) |
| |
| 216. | CSA | B64.5-11 | Double Check Valve (DCVA) Backflow Preventers | 7.2.10.10.(1) |
| |
| 217. | CSA | B64.5.1-11 | Double Check Valve Backflow Preventers for Fire Protection Systems (DCVAF) | 7.6.2.4.(2) Table 7.6.2.4. |
| |
| 218. | CSA | B64.6-11 | Dual Check Valve (DuC) Backflow Preventers | 7.2.10.10.(1) 7.6.2.6.(3) 7.7.1.1.(3) |
| |
| 219. | CSA | B64.6.1-11 | Dual Check Valve Backflow Preventers for Fire Protection Systems (DuCF) | 7.6.4.2.(2) Table 7.6.2.4. |
| |
| 220. | CSA | B64.7-11 | Laboratory Faucet Vacuum Breakers (LFVB) | 7.2.10.10.(1) |
| |
| 221. | CSA | B64.8-11 | Dual Check Valve Backflow Preventers with Intermediate Vent (DuCV) | 7.2.10.10.(1) |
| |
| 222. | CSA | B64.9-11 | Single Check Valve Backflow Preventers for Fire Protection Systems (SCVAF) | 7.6.2.4.(2) Table 7.6.2.4. |
| |
| 223. | CSA | B64.10-11 | Selection and Installation of Backflow Preventers | 7.2.10.10.(1) 7.6.2.3.(1) Table 7.6.2.4. 7.6.2.6.(1) |
| |
| 224. | CSA | B66-10 | Design, Material, and Manufacturing Requirements for Prefabricated Septic Tanks and Sewage Holding Tanks | 8.2.2.2.(1) 8.2.2.2.(2) 8.2.2.2.(3) 8.2.2.3.(7) 8.2.2.3.(11) |
| |
| 225. | CSA | CAN/CSA-B70-12 | Cast Iron Soil Pipe, Fittings and Means of Joining | 7.2.6.1.(1) 7.4.6.4.(2) |
| |
| 226. | CSA | B111-1974 | Wire Nails, Spikes and Staples | 9.23.3.1.(1) 9.26.2.2.(1) 9.29.5.6.(1) |
| |
| 227. | CSA | CSA B125.3-12 | Plumbing Fittings | 7.2.10.6.(1) 7.2.10.10.(2) 7.6.5.2.(2) |
| |
| 228. | CSA | CAN/CSA-B127.1-99 | Asbestos Cement Drain, Waste and Vent Pipe and Pipe Fittings | 7.2.5.1.(1) 7.2.6.2.(1) |
| |
| 229. | CSA | B127.2-M1977 | Components for Use in Asbestos Cement Building Sewer Systems | 7.2.5.1.(2) 7.2.6.2.(1) |
| |
| 230. | CSA | CAN/CSA-B128.1-06 | Design and Installation of Non-Potable Water Systems | 7.7.2.1.(2) 7.7.4.1.(1) |
| |
| 231. | CSA | CAN/CSA-B137.1-09 | Polyethylene (PE) Pipe, Tubing and Fittings for Cold Water Pressure Services | 7.2.5.5.(1) Table 7.2.11.2. |
| |
| 232. | CSA | CAN/CSA-B137.2-09 | Polyvinylchloride (PVC) Injection-Moulded Gasketed Fittings for Pressure Applications | 7.2.5.8.(1) 7.2.5.10.(1) Table 7.2.11.2. |
| |
| 233. | CSA | CAN/CSA-B137.3-09 | Rigid Polyvinylchloride (PVC) Pipe for Pressure Applications | 7.2.5.8.(1) 7.2.5.10.(1) Table 7.2.11.2. |
| |
| 234. | CSA | CAN/CSA-B137.5-09 | Crosslinked Polyethylene (PEX) Tubing Systems for Pressure Applications | 7.2.5.7.(1) Table 7.2.11.2. |
| |
| 235. | CSA | CAN/CSA-B137.6-09 | Chlorinated Polyvinylchloride (CPVC) Pipe, Tubing and Fittings for Hot and Cold Water Distribution Systems | 7.2.5.9.(1) 7.2.5.9.(2) Table 7.2.11.2. |
| |
| 236. | CSA | CAN/CSA-B137.9-09 | Polyethylene/Aluminium/Polyethylene (PE-AL-PE) Composite Pressure-Pipe Systems | 7.2.5.13.(1) Table 7.2.11.2. |
| |
| 237. | CSA | CAN/CSA-B137.10-09 | Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Composite Pressure-Pipe Systems | 7.2.5.13.(4) 7.2.5.14.(1) Table 7.2.11.2. |
| |
| 238. | CSA | CAN/CSA-B137.11-09 | Polypropylene (PP-R) Pipe and Fittings for Pressure Applications | 7.2.5.15.(1) |
| |
| 239. | CSA | B158.1-1976 | Cast Brass Solder Joint Drainage, Waste and Vent Fittings | 7.2.7.5.(1) 7.2.10.1.(1) |
| |
| 240. | CSA | CAN/CSA-B181.1-11 | Acrylonitrile-Butadiene-Styrene (ABS) Drain, Waste, and Vent Pipe and Pipe Fittings | 7.2.5.10.(1) 7.2.5.11.(1) 7.2.5.12.(1) 7.2.5.12.(2) 7.2.10.1.(2) 7.4.6.4.(2) |
| |
| 241. | CSA | CAN/CSA-B181.2-11 | Polyvinylchloride (PVC) and Chlorinated Polyvinylchloride (CPVC) Drain, Waste, and Vent Pipe and Pipe Fittings | 7.2.5.10.(1) 7.2.5.11.(1) 7.2.5.12.(1) 7.2.5.12.(2) 7.2.10.1.(3) 7.4.6.4.(2) |
| |
| 242. | CSA | CAN/CSA-B181.3-11 | Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Drainage Systems | 7.2.8.1.(1) |
| |
| 243. | CSA | CAN/CSA-B182.1-11 | Plastic Drain and Sewer Pipe and Pipe Fittings | Table 5.10.1.1. 7.2.5.10.(1) 7.2.5.12.(2) 7.4.6.4.(2) 9.14.3.1.(1) |
| |
| 244. | CSA | CAN/CSA-B182.2-11 | PSM Type Polyvinylchloride (PVC) Sewer Pipe and Fittings | 7.2.5.10.(1) 7.2.5.12.(2) |
| |
| 245. | CSA | CAN/CSA-B182.4-11 | Profile Polyvinylchloride (PVC) Sewer Pipe and Fittings | 7.2.5.10.(1) |
| |
| 246. | CSA | CAN/CSA-B182.6-11 | Profile Polyethylene (PE) Sewer Pipe and Fittings for Leak-Proof Sewer Applications | 7.2.5.10.(1) |
| |
| 247. | CSA | CAN/CSA-B214-12 | Installation Code for Hydronic Heating Systems | 6.2.1.4.(6) |
| |
| 248. | CSA | B242-05 | Groove and Shoulder-Type Mechanical Pipe Couplings | 7.2.10.4.(1) |
| |
| 249. | CSA | CAN/CSA-B272-93 | Prefabricated Self-Sealing Roof Vent Flashings | 7.2.10.14.(2) |
| |
| 250. | CSA | B355-09 | Lifts for Persons with Physical Disabilities | 3.8.3.5.(1) |
| |
| 251. | CSA | CAN/CSA-B356-10 | Water Pressure Reducing Valves for Domestic Water Supply Systems | 7.2.10.12.(1) |
| |
| 252. | CSA | B365-10 | Installation Code for Solid-Fuel-Burning Appliances and Equipment | 6.2.1.4.(1) 6.2.1.4.(5) 9.21.1.3.(1) 9.22.10.2.(1) 9.33.1.2.(1) |
| |
| 253. | CSA | B366.1-11 | Solid-Fuel-Fired Central Heating Appliances | 6.2.1.4.(2) |
| |
| 254. | CSA | B415.1-00 | Performance Testing of Solid-Fuel-Burning Heating Appliances | 6.2.1.4.(7) 9.33.1.2.(2) |
| |
| 255. | CSA | B481.1-12 | Testing and Rating of Grease Interceptors Using Lard | 7.2.3.2.(3) 8.1.3.1.(8) |
| |
| 256. | CSA | B481.2-12 | Testing and Rating of Grease Interceptors Using Oil | 7.2.3.2.(3) 8.1.3.1.(8) |
| |
| 257. | CSA | B481.4-12 | Maintenance of Grease Interceptors | 8.9.3.3.(1) |
| |
| 258. | CSA | CAN/CSA-B483.1-07 | Drinking Water Treatment Systems | 7.2.10.17.(1) |
| |
| 259. | CSA | CAN/CSA-B602-10 | Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe | 7.2.5.3.(2) 7.2.10.4.(2) |
| |
| 260. | CSA | C22.2 No. 0.3-09 | Test Methods for Electrical Wires and Cables | 3.1.4.3.(1) 3.1.4.3.(2) 3.1.5.18.(1) 3.1.5.18.(2) 3.1.5.21.(1) 3.1.5.21.(2) 3.6.4.3.(1) 9.34.1.5.(1) |
| |
| 261. | CSA | C22.2 No. 113-10 | Fans and Ventilators | 9.32.3.9.(6) |
| |
| 262. | CSA | C22.2 No. 141-10 | Emergency Lighting Equipment | 3.2.7.4.(2) 3.4.5.1.(3) 9.9.11.3(3) 9.9.12.3.(7) |
| |
| 263. | CSA | C22.2 No. 211.0-03 | General Requirements and Methods of Testing for Nonmetallic Conduit | 3.1.5.20.(1) |
| |
| 264. | CSA | CAN/CSA-C22.2 No. 262-04 | Optical Fiber Cable and Communication Cable Raceway Systems | 3.1.5.20.(1) |
| |
| 265. | CSA | CAN/CSA-C22.3 No. 1-10 | Overhead Systems | 3.1.19.1.(2) |
| |
| 266. | CSA | CAN/CSA-C88-M90 | Power Transformers and Reactors | 3.6.2.7.(10) |
| |
| 267. | CSA | CAN/CSA-C260-M90 | Rating for the Performance of Residential Mechanical Ventilating Equipment | 9.32.3.9.(1) 9.32.3.9.(2) Table 9.32.3.9. |
| |
| 268. | CSA | C282-09 | Emergency Electrical Power Supply for Buildings | 3.2.7.5.(1) |
| |
| 269. | CSA | CAN/CSA-C439-09 | Rating the Performance of Heat/Energy-Recovery Ventilators | 6.2.1.6.(2) 9.32.3.11.(2) |
| |
| 270. | CSA | CAN/CSA-C448.1-02 | Design and Installation of Earth Energy Systems for Commercial and Institutional Buildings | 6.2.1.4.(4) |
| |
| 271. | CSA | CAN/CSA-C448.2-02 | Design and Installation of Earth Energy Systems for Residential and Other Small Buildings | 6.2.1.4.(3) |
| |
| 272. | CSA | F280-12 | Determining the Required Capacity of Residential Space Heating and Cooling Appliances | 6.2.1.1.(1) 9.33.2.2.(3) |
| |
| 273. | CSA | CAN/CSA-F326-M91 | Residential Mechanical Ventilation Systems | 6.2.1.1.(1) |
| |
| 274. | CSA | CAN/CSA-F379.1-09 | Packaged Solar Domestic Hot Water Systems (Liquid-to-Liquid Heat Transfer) | 7.2.10.13.(1) 7.6.2.5.(3) 7.6.2.5.(4) |
| |
| 275. | CSA | F383-08 | Installation of Packaged Solar Domestic Hot Water Systems | 7.6.1.13.(1) |
| |
| 276. | CSA | G30.18-09 | Carbon Steel Bars for Concrete Reinforcement | 9.3.1.1.(4) 9.39.1.3.(1) |
| |
| 277. | CSA | G40.21-04 | General Requirements for Rolled or Welded Structural Quality Steel | 4.2.3.8.(1) Table 5.10.1.1. 9.23.4.3.(2) |
| |
| 278. | CSA | CAN/CSA-G164-M92 | Hot Dip Galvanising of Irregularly Shaped Articles | 4.4.4.1.(4) |
| |
| 279. | CSA | CAN/CSA-G401-07 | Corrugated Steel Pipe Products | Table 5.10.1.1. 7.2.6.8.(1) 9.14.3.1.(1) |
| |
| 280. | CSA | CAN/CSA-O80 Series-08 | Wood Preservation | 3.1.4.5.(1) 4.2.3.2.(1) 4.2.3.2.(2) Table 5.10.1.1. |
| |
| 281. | CSA | CAN/CSA-O80.1-08 | Specification of Treated Wood | 9.3.2.9.(6) |
| |
| 282. | CSA | CAN/CSA-O80.2-08 | Processing and Treatment | 4.2.3.2.(1) |
| |
| 283. | CSA | CAN/CSA-O80.3-08 | Preservative Formulations | 4.2.3.2.(1) |
| |
| 284. | CSA | O80.15-97 | Preservative Treatment of Wood for Building Foundation Systems, Basements and Crawl Spaces by Pressure Processes | 4.2.3.2.(1) |
| |
| 285. | CSA | O86-09 | Engineering Design in Wood | Table 4.1.8.9. 4.3.1.1.(1) |
| |
| 286. | CSA | O115-M1982 | Hardwood and Decorative Plywood | Table 5.10.1.1. 9.27.8.1.(1) 9.30.2.2.(1) |
| |
| 287. | CSA | O118.1-08 | Western Red Cedar Shakes and Shingles | Table 5.10.1.1. 9.26.2.1.(1) 9.27.7.1.(1) |
| |
| 288. | CSA | O118.2-08 | Eastern White Cedar Shingles | Table 5.10.1.1. 9.26.2.1.(1) 9.27.7.1.(1) |
| |
| 289. | CSA | O121-08 | Douglas Fir Plywood | Table 5.10.1.1. 9.23.14.2.(1) 9.23.15.2.(1) Table 9.23.16.2.A. 9.27.8.1.(1) 9.30.2.2.(1) Table A-13 Table A-14 Table A-15 |
| |
| 290. | CSA | CAN/CSA-O122-06 | Structural Glued-Laminated Timber | Table A-11 Table A-16 |
| |
| 291. | CSA | CAN/CSA-O132.2 Series-90 | Wood Flush Doors | 9.7.4.3.(4) |
| |
| 292. | CSA | O141-05 | Softwood Lumber | Table 5.10.1.1. 9.3.2.6.(1) |
| |
| 293. | CSA | O151-09 | Canadian Softwood Plywood | Table 5.10.1.1. 9.23.14.2.(1) 9.23.15.2.(1) Table 9.23.16.2.A. 9.27.8.1.(1) 9.30.2.2.(1) Table A-13 Table A-14 Table A-15 |
| |
| 294. | CSA | O153-M1980 | Poplar Plywood | Table 5.10.1.1. 9.23.14.2.(1) 9.23.15.2.(1) Table 9.23.16.2.A. 9.27.8.1.(1) 9.30.2.2.(1) |
| |
| 295. | CSA | O177-06 | Qualification Code for Manufacturers of Structural Glued-Laminated Timber | 4.3.1.2.(1) Table A-11 Table A-16 |
| |
| 296. | CSA | O325-07 | Construction Sheathing | Table 5.10.1.1. 9.23.14.2.(1) 9.23.14.4.(2) Table 9.23.14.5.B. 9.23.15.2.(1) 9.23.15.3.(2) Table 9.23.15.7.B. Table 9.23.16.2.B. 9.29.9.1.(2) 9.29.9.2.(5) Table A-13 Table A-14 Table A-15 |
| |
| 297. | CSA | O437.0-93 | OSB and Waferboard | Table 5.10.1.1. 9.23.14.2.(1) 9.23.14.4.(2) 9.23.15.2.(1) 9.23.15.3.(2) Table 9.23.16.2.A. 9.27.10.1.(1) 9.29.9.1.(2) 9.30.2.2.(1) Table A-13 Table A-14 Table A-15 |
| |
| 298. | CSA | S16-09 | Design of Steel Structures | Table 4.1.8.9. 4.3.4.1.(1) |
| |
| 299. | CSA | CAN/CSA-S136-07 | North American Specifications for the Design of Cold Formed Steel Structural Members (using the Appendix B provisions applicable to Canada) | Table 4.1.8.9. 4.3.4.2.(1) |
| |
| 300. | CSA | CAN/CSA-S157-05 / S157.1-05 | Strength Design in Aluminum / Commentary on CSA S157-05, Strength Design in Aluminum | 4.3.5.1.(1) |
| |
| 301. | CSA | S304.1-04 | Design of Masonry Structures | Table 4.1.8.9. 4.3.2.1.(1) |
| |
| 301. | CSA | S307-M1980 | Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings | 9.23.13.11.(5) |
| |
| 303. | CSA | S367-09 | Air-, Cable-, and Frame-Membrane Supported Structures | 4.4.1.1.(1) |
| |
| 304. | CSA | CAN/CSA-S406-92 | Construction of Preserved Wood Foundations | 9.13.2.8.(1) 9.15.2.4.(1) 9.16.5.1.(1) |
| |
| 305. | CSA | S413-07 | Parking Structures | 4.4.2.1.(1) |
| |
| 306. | CSA | S478-95 | Guideline on Durability in Buildings | 5.1.4.2.(3) Table 5.10.1.1. |
| |
| 307. | CSA | Z32-09 | Electrical Safety and Essential Electrical Systems in Health Care Facilities | 3.2.7.3.(4) 3.2.7.6.(1) 3.7.5.1.(1) |
| |
| 308. | CSA | CAN/CSA-Z91-02 | Health and Safety Code for Suspended Equipment Operations | 4.4.4.1.(1) |
| |
| 309. | CSA | Z240 MH Series-09 | Manufactured Homes | 3.1.1.1.(2) of Division C 3.2.4.1.(3) of Division C |
| |
| 310. | CSA | Z240.2.1-09 | Structural Requirements for Manufactured Homes | 9.1.1.9.(1) 9.12.2.2.(6) 9.15.1.3.(1) |
| |
| 311. | CSA | Z240.10.1-08 | Site Preparation, Foundation and Anchorage of Manufactured Homes | 9.15.1.3.(1) 9.23.6.3.(1) |
| |
| 312. | CSA | CAN/CSA-Z241 Series-03 | Park Model Trailers | 9.38.1.1.(1) 9.38.2.1.(1) 3.1.1.1.(2) of Division C 3.2.4.1.(3) of Division C |
| |
| 313. | CSA | CAN/CSA-Z317.2-10 | Special Requirements for Heating, Ventilation and Air Conditioning (HVAC) Systems in Health Care Facilities | 6.2.1.1.(1) |
| |
| 314. | CSA | CAN/CSA-Z662-11 / Z662.1-11 | Oil and Gas Pipeline Systems / Commentary on CAN/CSA-Z662-11, Oil and Gas Pipeline Systems | 3.2.3.21.(1) |
| |
| 315. | CSA | Z7396.1-09 | Medical Gas Piping Systems - Part 1: Pipelines for Medical Gases and Vacuum | 3.7.5.2.(1) |
| |
| 316. | CSA / IAPMO | CSA B45.5-11 / IAPMO Z124-2011 | Plastic Plumbing Fixtures | 7.2.2.2.(6) |
| |
| 317. | CWC | 2009 | Engineering Guide for Wood Frame Construction | 9.4.1.1.(1) |
| |
| 318. | DBR | Technical Paper No. 194, May 1965 | Fire Endurance of Protected Steel Columns and Beams | Table 11.5.1.1.A. Table 11.5.1.1.B. Table 11.5.1.1.C. Table 11.5.1.1.D/E. Table 11.5.1.1.F. |
| |
| 319. | DBR | Technical Paper No. 207, October 1965 | Fire Endurance of Unit Masonry Walls | Table 11.5.1.1.A. Table 11.5.1.1.B. Table 11.5.1.1.C. Table 11.5.1.1.D/E. Table 11.5.1.1.F. |
| |
| 320. | DBR | Technical Paper No. 222, June 1966 | Fire Endurance of Light-Framed and Miscellaneous Assemblies | Table 11.5.1.1.A. Table 11.5.1.1.B. Table 11.5.1.1.C. Table 11.5.1.1.D/E. Table 11.5.1.1.F. |
| |
| 321. | EPA | 625/R-92/016 (1994) | Radon Prevention in the Design and Construction of Schools and Other Large Buildings | 6.2.1.1.(1) |
| |
| 322. | FINA | 2009 | Rules and Regulations - FINA Facilities Rules 2009-2013 - FR5 Diving Facilities | 3.11.4.1.(17) |
| |
| 323. | HI | 2005 | Hydronics Institute Manuals | 6.2.1.1.(1) |
| |
| 324. | HRAI | 2005 | Digest | 6.2.1.1.(1) 6.2.3.5.(1) 6.2.4.3.(13) |
| |
| 325. | HUD | Rehabilitation Guidelines 2000 | Guideline on Fire Ratings of Archaic Materials and Assemblies | Table 11.5.1.1.A. Table 11.5.1.1.B. Table 11.5.1.1.C. Table 11.5.1.1.D/E. Table 11.5.1.1.F. |
| |
| 326. | HVI | HVI 915-2009 | Procedure for Loudness Rating of Residential Fan Products | 9.32.3.9.(2) Table 9.32.3.9. |
| |
| 327. | HVI | HVI 916-2009 | Airflow Test Procedure | 9.32.3.9.(1) |
| |
| 328. | ISO | 3864-1: 2011 | Graphical Symbols – Safety Colours and Safety Signs – Part 1: Design Principles for Safety Signs and Safety Markings | 3.4.5.1.(2) 9.9.11.3.(2) |
| |
| 329. | ISO | 7010: 2003 | Graphical Symbols - Safety Colours and Safety Signs - Safety Signs Used in Workplaces and Public Areas | 3.4.5.1.(2) 9.9.11.3.(2) |
| |
| 330. | ISO | 8201: 1987(E) | Acoustics - Audible Emergency Evacuation Signal | 3.2.4.20.(2) |
| |
| 331. | ISO | 23599: 2012 | Assistive Products for Blind and Vision-Impaired Persons – Tactile Walking Surface Indicators | 3.8.3.18.(1) | ||
| 332. | MMAH | Supplementary Standard SA-1, September 2, 2014 | Objectives and Functional Statements Attributed to the Acceptable Solutions | 1.2.1.1.(1) of Division A 1.2.1.1.(2) of Division A |
| |
| 333. | MMAH | Supplementary Standard SB-1, September 2, 2014 | Climatic and Seismic Data | 1.1.2.1.(1) 1.1.2.1.(2) 3.2.6.2.(2) 3.3.1.7.(1) 5.2.1.1.(1) 5.2.1.1.(2) 6.2.1.1.(1) 6.2.1.7.(1) 7.4.10.4.(1) 9.4.1.1.(3) 9.4.2.2.(1) Table 9.25.5.2. Table 9.32.3.10.A. 9.33.3.2.(1) |
| |
| 334. | MMAH | Supplementary Standard SB-2, September 2, 2014 | Fire Performance Ratings | 3.1.5.23.(1) 3.1.7.1.(2) 3.1.8.14.(2) 3.1.9.5.(1) 3.1.9.5.(2) 3.1.12.1.(3) 3.2.3.12.(1) 3.2.3.13.(4) 3.13.2.1.(8) 3.13.3.5.(1) 3.13.3.6.(2) 3.13.4.2.(7) 9.10.3.1.(1) 9.10.3.2.(1) 9.10.5.1.(4) 9.10.9.9.(1) 9.10.13.14.(1) |
| |
| 335. | MMAH | Supplementary Standard SB-3, September 2, 2014 | Fire and Sound Resistance of Building Assemblies | 9.10.3.1.(1) 9.10.5.1.(4) 9.11.2.1.(1) 9.11.2.1.(2) |
| |
| 336. | MMAH | Supplementary Standard SB-4, September 14, 2012 | Measures for Fire Safety in High Buildings | 3.2.6.2.(1) 3.2.6.2.(6) 3.2.6.5.(3) 3.2.6.9.(1) 3.2.6.10.(2) 3.2.6.14.(1) Table 11.5.1.1.C. Table 11.5.1.1.D/E. Table 11.5.1.1.F. |
| |
| 337. | Revoked: O. Reg. 332/12, Sentence 4.2.1.1.(2). |
| ||||
| 338. | MMAH | Supplementary Standard SB-6, September 14, 2012 | Percolation Times and Soil Descriptions | 8.2.1.2.(2) |
| |
| 339. | MMAH | Supplementary Standard SB-7, September 14, 2012 | Guards for Housing and Small Buildings | 9.8.8.2.(5) |
| |
| 340. | MMAH | Supplementary Standard SB-8, September 14, 2012 | Design, Construction and Installation of Anchorage Systems for Fixed Access Ladders | 3.6.1.5.(1) |
| |
| 341. | MMAH | Supplementary Standard SB-9, September 14, 2012 | Requirements for Soil Gas Control | 9.13.4.1.(1) 9.13.4.2.(2) to (4) |
| |
| 342. | MMAH | Supplementary Standard SB-10, September 14, 2012 | Energy Efficiency Requirements | Table 9.7.3.3. 12.2.1.1.(2) 12.2.1.2.(2) 12.2.2.1.(1) 12.2.3.1.(1) |
| |
| 343. | MMAH | Supplementary Standard SB-11, September 14, 2012 | Construction of Farm Buildings | 1.3.1.2.(4) of Division A |
| |
| 344. | MMAH | Supplementary Standard SB-12, September 2, 2014 | Energy Efficiency for Housing | Table 9.7.3.3. Table 11.5.1.1.C. 12.2.1.1.(3) 12.2.1.2.(3) |
| |
| 345. | MMAH | Supplementary Standard SB-13, September 14, 2012 | Glass in Guards | 3.1.20.1.(1) |
| |
| 346. | MMAH | Supplementary Standard SC-1, September 14, 2012 | Code of Conduct for Registered Code Agencies | 3.7.4.1.(2) of Division C |
| |
| 347. | MOE | PIBS 6879 2008 | Design Guidelines for Sewage Works | 7.1.5.5.(2) |
| |
| 348. | MOE | PIBS 6881e 2008 | Design Guidelines for Drinking-Water Systems | 7.1.5.5.(1) |
| |
| 349. | NFPA | 2014 Publication | National Fire Codes | 6.2.1.1.(1) |
| |
| 350. | NFPA | 13-2013 | Installation of Sprinkler Systems | 3.1.9.1.(4) 3.2.4.9.(2) 3.2.4.17.(1) 3.2.5.13.(1) 3.2.8.4.(7) 3.3.2.12.(3) 3.15.1.1.(3) 3.15.1.1.(4) 3.15.1.5.(2) 3.15.1.6.(2) 3.15.2.1.(1) 3.15.2.2.(1) 3.15.3.1.(1) 9.10.9.6.(11) |
| |
| 351. | NFPA | 13D-2010 | Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes | 3.2.5.13.(3) |
| |
| 352. | NFPA | 13R-2010 | Installation of Sprinkler Systems in Residential Occupancies up to and including Four Stories in Height | 3.2.5.13.(2) |
| |
| 353. | NFPA | 14-2010 | Installation of Standpipe and Hose Systems | 3.2.9.2.(1) |
| |
| 354. | NFPA | 20-2010 | Installation of Stationary Pumps for Fire Protection | 3.2.4.10.(4) 3.2.5.19.(1) |
| |
| 355. | NFPA | 24-2013 | Installation of Fire Service Mains and Their Appurtenances | 7.2.11.1.(1) |
| |
| 356. | NFPA | 68-2007 | Explosion Protection by Deflagration Venting | 3.3.6.3.(1) 3.3.6.4.(2) 3.3.6.4.(4) |
| |
| 357. | NFPA | 72-2013 | National Fire Alarm and Signaling Code | 3.2.4.22.(13) 9.10.19.1.(2) 9.10.19.3.(3) |
| |
| 358. | NFPA | 80-2010 | Fire Doors and Other Opening Protectives | 3.1.8.5.(2) 3.1.8.10.(2) 3.1.8.14.(1) 3.1.9.1.(5) 3.13.3.1.(2) 9.10.9.6.(13) 9.10.13.1.(1) |
| |
| 359. | NFPA | 82-2009 | Incinerators, Waste and Linen Handling Systems and Equipment | 6.2.6.1.(1) 9.10.10.5.(2) |
| |
| 360. | NFPA | 91-2010 | Exhaust Systems for Air Conveying of Vapors, Gases, Mists and Noncombustible Particulate Solids | 6.2.13.4.(1) |
| |
| 361. | NFPA | 96-2011 | Ventilation Control and Fire Protection of Commercial Cooking Operations | 3.2.4.9.(2) 6.2.2.6.(1) |
| |
| 362. | NFPA | 130-2010 | Fixed Guideway Transit and Passenger Rail Systems | 3.13.7.1.(1) |
| |
| 363. | NFPA | 211-2010 | Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances | 6.3.1.2.(2) 6.3.1.3.(1) |
| |
| 364. | NFPA | 214-2011 | Water-Cooling Towers | 6.2.3.14.(3) |
| |
| 365. | NFPA | 701-2010 | Fire Tests for Flame Propagation of Textiles and Films | 3.14.1.6.(1) 3.14.2.5.(1) |
| |
| 366. | NLGA | 2010 | Standard Grading Rules for Canadian Lumber | 1.4.1.2.(1) of Division A 9.3.2.1.(1) Table 9.3.2.1. Tables A-1 to A-10 |
| |
| 367. | NRCan | January 2005, including all amendments, revisions and supplements effective to May 31, 2006 | EnerGuide for New Houses: Administrative and Technical Procedures | 12.2.1.1.(3) 12.2.1.2.(3) |
| |
| 368. | NSF | NSF/ANSI 46-2010 | Evaluation of Components and Devices Used in Wastewater Treatment Systems | 8.6.2.1.(2) |
| |
| 369. | NSF | NSF/ANSI 61-2013 | Drinking Water System Components - Health Effects | 7.2.10.7.(1) |
| |
| 370. | SMACNA | ANSI/SMACNA 006-2006, 3rd Edition 2005 | HVAC Duct Construction Standards - Metal and Flexible | 6.2.1.1.(1) 6.2.4.2.(3) 6.2.4.3.(11) 6.2.4.3.(12) |
| |
| 371. | TPIC | 2011 | Truss Design Procedures and Specifications for Light Metal Plate Connected Wood Trusses (Limit States Design) | 9.23.13.11.(6) |
| |
| 372. | UL | ANSI/UL 300-2005 | Fire Extinguishing Systems for Protection of Commercial Cooking Equipment | 6.2.2.6.(2) |
| |
| 373. | UL | UL 2034-2008 | Single and Multiple Station Carbon Monoxide Alarms | 6.2.12.3.(1) 9.33.4.3.(1) |
| |
| 374. | ULC | CAN/ULC-S101-07 | Fire Endurance Tests of Building Construction and Materials | 3.1.5.12.(3) 3.1.5.12.(4) 3.1.5.12.(6) 3.1.7.1.(1) 3.1.11.7.(1) 3.2.3.8.(1) 3.2.6.5.(6) 9.10.16.3.(1) |
| |
| 375. | ULC | CAN/ULC-S102-10 | Test for Surface Burning Characteristics of Building Materials and Assemblies | 3.1.5.25.(1) 3.1.12.1.(1) |
| |
| 376. | ULC | CAN/ULC-S102.2-10 | Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies | 3.1.12.1.(2) 3.1.13.4.(1) |
| |
| 377. | ULC | CAN/ULC-S102.3-07 | Fire Test of Light Diffusers and Lenses | 3.1.13.4.(1) |
| |
| 378. | ULC | CAN/ULC-S102.4-10 | Fire and Smoke Characteristics of Electrical Wiring and Cables | 3.1.5.18.(1) 3.1.5.20.(2) 3.6.4.3.(1) |
| |
| 379. | ULC | CAN/ULC-S104-10 | Fire Tests of Door Assemblies | 3.1.8.4.(1) 3.2.6.5.(3) |
| |
| 380. | ULC | CAN/ULC-S105-09 | Fire Door Frames Meeting the Performance Required by CAN4-S104 | 9.10.13.6.(1) |
| |
| 381. | ULC | CAN4-S106-M80 | Fire Tests of Window and Glass Block Assemblies | 3.1.8.4.(1) |
| |
| 382. | ULC | CAN/ULC-S107-10 | Fire Tests of Roof Coverings | 3.1.15.1.(1) |
| |
| 383. | ULC | CAN/ULC-S109-03 | Flame Tests of Flame-Resistant Fabrics and Films | 3.1.16.1.(1) 3.14.1.6.(1) 3.14.2.5.(1) 6.2.3.16.(1) 6.2.3.17.(1) 6.2.4.9.(1) |
| |
| 384. | ULC | CAN/ULC-S110-07 | Test for Air Ducts | 6.2.3.2.(2) 6.2.3.2.(4) |
| |
| 385. | ULC | ULC-S111-07 | Fire Tests for Air Filter Units | 6.2.3.13.(1) 6.2.4.14.(1) |
| |
| 386. | ULC | CAN/ULC-S112-10 | Fire Test of Fire-Damper Assemblies | 3.1.8.4.(1) |
| |
| 387. | ULC | CAN/ULC-S112.1-10 | Leakage Rated Dampers for Use in Smoke Control Systems | 6.2.3.9.(3) |
| |
| 388. | ULC | CAN/ULC-S112.2-10 | Fire Test of Ceiling Firestop Flap Assemblies | 3.1.9.5.(2) 3.6.4.3.(2) |
| |
| 389. | ULC | CAN/ULC-S113-07 | Wood Core Doors Meeting the Performance Required by CAN/ULC-S104 for Twenty Minute Fire Rated Closure Assemblies | 9.10.13.2.(1) |
| |
| 390. | ULC | CAN/ULC-S114-05 | Test for Determination of Non-Combustibility in Building Materials | 1.4.1.2.(1) of Division A |
| |
| 391. | ULC | CAN/ULC-S115-11 | Fire Tests of Firestop Systems | 3.1.5.16.(3) 3.1.9.1.(1) 3.1.9.1.(2) 3.1.9.1.(3) 3.1.9.3.(7) 3.1.9.4.(3) 3.1.9.4.(7) 9.10.9.6.(2) 9.10.9.7.(3) |
| |
| 392. | ULC | CAN/ULC-S124-06 | Test for the Evaluation of Protective Coverings for Foamed Plastic | 3.1.5.12.(2) |
| |
| 393. | ULC | CAN/ULC-S126-06 | Test for Fire Spread Under Roof-Deck Assemblies | 3.1.14.1.(1) 3.1.14.2.(1) |
| |
| 394. | ULC | CAN/ULC-S134-92 | Fire Test of Exterior Wall Assemblies | 3.1.5.5.(1) 3.2.3.7.(3) 3.2.3.7.(6) |
| |
| 395. | ULC | CAN/ULC-S135-04 | Test Method for the Determination of Combustibility Parameters of Building Materials Using an Oxygen Consumption Calorimeter (Cone Calorimeter) | 3.1.5.1.(2) |
| |
| 396. | ULC | CAN/ULC-S138-06 | Fire Test for Fire Growth of Insulated Building Panels in a Full-Scale Room Configuration | 3.1.5.12.(7) |
| |
| 397. | ULC | ULC-S139-00 | Fire Test for Evaluation of Integrity of Electrical Cables | 3.2.7.10.(2) 3.2.7.10.(3) |
| |
| 398. | ULC | CAN/ULC-S143-09 | Fire Tests for Non-Metallic Electrical and Optical Fibre Cable Raceways | 3.1.5.20.(1) |
| |
| 399. | ULC | S505-1974 | Fusible Links for Fire Protection Service | 3.1.8.9.(1) |
| |
| 400. | ULC | S513-1978 | Threaded Couplings for 38 mm and 65 mm Fire Hose | 3.2.9.2.(7) |
| |
| 401. | ULC | CAN/ULC-S524-06 | Installation of Fire Alarm Systems | 3.1.8.12.(2) 3.1.8.12.(3) 3.2.4.5.(1) 3.2.4.22.(6) 3.2.4.22.(11) 9.10.19.4.(3) 9.10.19.6.(2) |
| |
| 402. | ULC | CAN/ULC-S531-02 | Smoke Alarms | 3.2.4.22.(1) 9.10.19.1.(1) |
| |
| 403. | ULC | CAN/ULC-S537-04 | Verification of Fire Alarm Systems | 3.2.4.5.(2) 3.2.4.22.(6) |
| |
| 404. | ULC | CAN/ULC-S543-09 | Internal Lug Quick Connect Couplings for Fire Hose | 3.2.9.2.(7) |
| |
| 405. | ULC | CAN/ULC-S553-02 | Installation of Smoke Alarms | 3.2.4.22.(9) 9.10.19.3.(2) |
| |
| 406. | ULC | CAN/ULC-S561-03 | Installation and Services for Fire Signal Receiving Centres and Systems | 3.2.4.8.(4) |
| |
| 407. | ULC | CAN/ULC-S572-10 | Photoluminescent and Self-Luminous Signs and Path Marking Systems | 3.4.5.1.(5) 9.9.11.3.(3) |
| |
| 408. | ULC | CAN/ULC-S610-M87 | Factory-Built Fireplaces | 9.22.8.1.(1) |
| |
| 409. | ULC | S628-93 | Fireplace Inserts | 9.22.10.1.(1) |
| |
| 410. | ULC | CAN/ULC-S629-M87 | 650ºC Factory-Built Chimneys | 9.21.1.2.(1) |
| |
| 411. | ULC | CAN/ULC-S639-M87 | Steel Liner Assemblies for Solid Fuel-Burning Masonry Fireplaces | 9.22.2.3.(1) |
| |
| 412. | ULC | CAN/ULC-S701-11 | Thermal Insulation, Polystyrene, Boards and Pipe Covering | Table 5.10.1.1. 9.15.4.1.(1) Table 9.23.16.2.A. 9.25.2.2.(1) 9.25.2.2.(4) |
| |
| 413. | ULC | CAN/ULC-S702-09 | Mineral Fibre Thermal Insulation for Buildings | Table 5.10.1.1. Table 9.23.16.2.A. 9.25.2.2.(1) |
| |
| 414. | ULC | CAN/ULC-S703-09 | Cellulose Fibre Insulation (CFI) for Buildings | Table 5.10.1.1. 9.25.2.2.(1) |
| |
| 415. | ULC | CAN/ULC-S704-11 | Thermal Insulation, Polyurethane and Polyisocyanurate Boards, Faced | Table 5.10.1.1. Table 9.23.16.2.A. 9.25.2.2.(1) |
| |
| 416. | ULC | CAN/ULC-S705.1-01 | Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Material - Specification | Table 5.10.1.1. 9.25.2.2.(1) |
| |
| 417. | ULC | CAN/ULC-S705.2-05 | Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application | 5.3.1.3.(3) Table 5.10.1.1. 9.25.2.5.(1) |
| |
| 418. | ULC | CAN/ULC-S706-09 | Wood Fibre Thermal Insulation for Buildings | Table 5.10.1.1. 9.23.15.7.(3) Table 9.23.16.2.A. 9.25.2.2.(1) 9.29.8.1.(1) |
| |
| 419. | ULC | CAN/ULC-S716.1-12 | Exterior Insulation and Finish Systems (EIFS) – Materials and Systems | 5.10.3.1.(1) 9.27.13.1.(1) 9.27.13.2.(1) |
| |
| 420. | ULC | CAN/ULC-S716.2-12 | Exterior Insulation and Finish Systems (EIFS) – Installation of EIFS Components and Water Resistive Barrier | 9.27.13.3.(2) |
| |
| 421. | ULC | CAN/ULC-S716.3-12 | Exterior Insulation and Finish Systems (EIFS) – Design Application | 9.27.13.3.(1) |
| |
| 422. | ULC | CAN/ULC-S741-08 | Air Barrier Materials - Specification | 5.4.1.2.(1) |
| |
| 423. | ULC | ULC/ORD-C263.1-99 | Sprinkler-Protected Window Systems | 3.1.8.18.(1) |
| |
| 424. | ULC | ULC/ORD-C199P-02 | Combustible Piping for Sprinkler Systems | 3.2.5.14.(2) 3.2.5.14.(5) |
| |
| 425. | ULC | ULC/ORD-C1254.6-1995 | Fire Testing of Restaurant Cooking Area Fire Extinguishing System Units | 6.2.2.6.(2) 3.6.4.3.(1) |
| |
| 426. | USDA | October 1993 | Soil Survey Manual | 8.2.1.2.(2) |
| |
Notes to Table 1.3.1.2.:
(1) Some titles have been abridged to omit superfluous wording.
Note: On January 1, 2018, Table 1.3.1.2. of Division B of the Regulation is amended by adding the following item: (See: O. Reg. 139/17, s. 7 (1))
| 327.1 | IAPMO | PS 63-2014 | Plastic Leaching Chambers | 8.7.2.3.(3) |
Note: On July 1, 2017, items 332, 342, 344, 357 and 405 of Table 1.3.1.2. of Division B of the Regulation are revoked and the following substituted: (See: O. Reg. 139/17, s. 7 (2))
| 332. | MMAH | Supplementary Standard SA-1, March 21, 2017 | Objectives and Functional Statements Attributed to the Acceptable Solutions | 1.2.1.1.(1) of Division A 1.2.1.1.(2) of Division A |
. . . . .
| 342. | MMA | Supplementary Standard SB-10, December 22, 2016 | Energy Efficiency Requirements | Table 9.7.3.3. 12.2.1.1.(2) 12.2.1.2.(2) 12.2.2.1.(1) 12.2.3.1.(1) |
. . . . .
| 344. | MMA | Supplementary Standard SB-12, July 7, 2016 | Energy Efficiency for Housing | Table 9.7.3.3. Table 11.5.1.1.C. 12.2.1.1.(3) 12.2.1.2.(3) |
. . . . .
| 357. | NFPA | 72-2013 | National Fire Alarm and Signaling Code | 3.2.4.22.(13) 9.10.19.1.(2) 9.10.19.3.(4) |
. . . . .
| 405. | ULC | CAN/ULC-S553-02 | Installation of Smoke Alarms | 3.2.4.22.(9) 9.10.19.3.(3) |
1.3.2. Abbreviations
In Plain Language
This clause points to Table 1.3.1.2, a long reference table listing every external standard cited throughout the Code (from organizations like ASHRAE, ANSI, and ASME) along with the specific edition that applies and which Code articles use it. Rather than restating standard editions throughout the text, the Code centralizes them here.
This is a plain-language summary of the 2012/2017 Ontario Building Code text above, for general understanding only and not a substitute for the Code. Always confirm current requirements against the 2024 edition (O.Reg. 163/24) or a qualified professional before construction.