Item

Column 1

Material

Column 2

Standard

Column 3

Limitations

1.

Polyethylene pipe and fittings

Certified to Series 160 or a higher series of CAN/CSA-B137.1, "Polyethylene (PE) pipe, Tubing and Fittings for Cold water pressure Services"

2.

Crosslinked polyethylene pressure pipe or tube and fittings

Certified to CAN/CSA-B137.5, "Crosslinked Polyethylene (PEX) Tubing Systems for pressure Applications"

3.

pvc pipe and fittings

Certified to CAN/CSA-B137.3, "Rigid Polyvinylchloride (pvc) pipe and Fittings for pressure Applications", or certified to CAN/CSA-B137.2, "Polyvinylchloride (pvc) Injection-Moulded Gasketed Fittings for pressure Applications"

pipe and fittings must have a rated working pressure of 1 100 kPa or more

4.

Cpvc pipe and fittings

Certified to CAN/CSA-B137.6, "Chlorinated Polyvinylchloride (Cpvc) pipe, Tubing and Fittings for Hot and Cold water Distribution Systems"

The design temperature and pressure shall conform to the requirements of the CAN/CSA-B137.6, "Chlorinated Polyvinylchloride (Cpvc) pipe, Tubing and Fittings for Hot and Cold water Distribution Systems"

5.

Cast iron water pipe

Conform to ANSI/AWWA C151/A21.51, "Ductile-Iron pipe, Centrifugally Cast"

pipe shall have a mortarp://thehandyforce.com/exterior/" title ="Exterior home repairs in Toronto">cement-mortar lining conforming to ANSI/AWWA C104/A21.4, "mortarp://thehandyforce.com/exterior/" title ="Exterior home repairs in Toronto">cement-Mortar Lining for Ductile-Iron pipe and Fittings"

6.

Iron fittings for cast iron or ductile-iron water pipes

Conform to ANSI/AWWA C110/A21.10, "Ductile-Iron and Gray-Iron Fittings"

pipe shall have a mortarp://thehandyforce.com/exterior/" title ="Exterior home repairs in Toronto">cement-mortar lining conforming to ANSI/AWWA C104/A21.4, "mortarp://thehandyforce.com/exterior/" title ="Exterior home repairs in Toronto">cement-Mortar Lining for Ductile-Iron pipe and Fittings"

7.

Rubber gasket joints for cast iron and ductile-iron water pipes

Conform to ANSI/AWWA C111/A21.11, "Rubber Gasket Joints for Ductile-Iron pressure Pipe and Fittings"

8.

Screwed cast iron water fittings

Conform to ASME B16.4, "Gray Iron Threaded Fittings: Classes 125 and 250"

Screwed cast iron water fittings shall be mortarp://thehandyforce.com/exterior/" title ="Exterior home repairs in Toronto">cement-mortar lined or galvanized

9.

Type K soft copper tube

Certified to ASTM B88, "Seamless copper Water tube"

10.

Solder-joint fittings for copper water systems

Conform to ASME B16.18, "Cast copper Alloy Solder Joint pressure Fittings", or conform to ASME B16.22, "Wrought copper and copper Alloy Solder-Joint pressure Fittings"

Solder-joint fittings not made by casting or the wrought process shall conform to the applicable requirements of ASME B16.18, "Cast copper Alloy Solder-Joint pressure Fittings"

11.

Flared-joint fittings for copper water systems

Conform to ASME B16.26, "Cast copper Alloy Fittings for Flared copper Tubes"

Flared-joint fittings not made by casting shall conform to ASME B16.26, "Cast copper Alloy Fittings for Flared copper Tubes"

12.

PE/AL/PE pipe and fittings

Certified to CAN/CSA-B137.9, "Polyethylene/Aluminum/ Polyethylene (PE-AL-PE) Composite pressure-pipe Systems"

13.

PEX/AL/PEX pipe and fittings

Certified to CAN/CSA-B137.10, "Crosslinked Polyethylene/ Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Composite pressure-pipe Systems"