The Quebec Building Code | CERTIFICATE OF CONFORMITY

The Quebec Building Code | CERTIFICATE OF CONFORMITY

DIVISION 4 CERTIFICATE OF CONFORMITY

CERTIFICATE OF CONFORMITY

O.C. 895-2004, s. 2.

  • A contractor or owner-builder shall, after construction work, except maintenance, repair or demolition work on a passenger ropeway, provide the Régie du bâtiment du Québec with a certificate of conformity with this Chapter produced and signed by a recognized person stating that

    1. the passenger ropeway is installed in accordance with this Chapter;

    2. the tests and inspections that are provided for the passenger ropeway have been performed and their results are satisfactory; and

    3. the information required from the manufacturer pursuant to the standard has been provided by the latter.

      The certificate shall also specify the components inspected, the means used and the data used as the basis for drawing up the certificate, the type, trademark, model, address of the site where the construction work on the passenger ropeway was performed, the nature of the work, the date of the tests and inspections and the name and title of the person by whom they were performed, the date of signature, name, address and telephone number of the engineer who produced the certificate and the date of completion of the construction work. The certificate of conformity may be made on the form provided for that purpose by the Board.

      O.C. 895-2004, s. 2.

  • An engineer who is a member of the Ordre des ingénieurs du Québec, or the holder of a temporary licence issued under the Engineers Act (chapter I-9), whose professional activities are related to the field of elevators or other elevating devices, is a person recognized for producing and signing the certificate of conformity required under section 7.04.

    O.C. 895-2004, s. 2.

  • A person is no longer recognized when the person ceases to be a member of the Ordre des ingénieurs du Québec or is no longer the holder of a temporary licence.

    O.C. 895-2004, s. 2.